Handley Vapour Stop

$0.00

Vapour Stop is a two-component epoxy coating designed to work as a water vapour barrier prior to installation of timber flooring.  Vapour Stop vastly reduces the ability of moisture to migrate from concrete below into timber above, thereby reducing the likelihood of flooring failure through dimensional changes in the wood.

Available in Trade Kit (comes with roller sleeve + mixing bucket) or Economy Box (just the Part A and B epoxy and instructions).

If the product DOES NOT dry glossy, please call Handley Industries.

Vapour Stop is a two-component epoxy coating designed to work as a water vapour barrier prior to installation of timber flooring.  Vapour Stop vastly reduces the ability of moisture to migrate from concrete below into timber above, thereby reducing the likelihood of flooring failure through dimensional changes in the wood.

Available in Trade Kit (comes with roller sleeve + mixing bucket) or Economy Box (just the Part A and B epoxy and instructions).

If the product DOES NOT dry glossy, please call Handley Industries.

Coverage: 20 sqm per 5L pack / 4 sqm per litre

Uses: two-component epoxy coating designed to work as a water vapour barrier prior to installation of timber flooring

Drying Time: 20-minute working time, 8-12 hour curing time (dependent on ambient conditions, recoating should be within 24 hours)

Temperature: DO NOT use the product if temperature is likely to fall under 10 degrees Centigrade

Application: 6mm mohair roller sleeve

Features

  • Extremely low moisture permeability

  • Fast curing

  • Bonds strongly to concrete

  • All UNI-STICK to chemically bond for secure flooring installation

You Might Also Like